|
|
|
|
|
|
|
LISTING DETAILS
|
|
|
|
|
|
|
|
Industry >
Machinery Equipment |
|
|
Tester HP 4062UX Semiconductor Process Control System from Allwin21 Corp. |
|
|
Tester HP 4062UX Semiconductor Process Control System from Allwin21 Corp.
Displayed information--measurement setups, auto-sequence pro-
grams, measurement results--can be dumped directly onto an ex-
ternal graphics plotter to obtain publication-quality hard copies. A
built-in 3-~-inch disk drive enables you to store measurement setups
and measured data, which can be accessed by another compatible HP
disk drive for further processing.
Auto Sequence Programs
Measurement programs stored on a HP 4145B 3~-inch disk can be
linked by an auto-sequence program, making it possible to perform a
series of measurements with just one keystroke.
Four Oser-Selectable Display Formats to Suit the
Evaluation
Measurement results can be displayed in one of four display for-
mats: Graphics, list, matrix, or schmoo. After measurement has been
made and the results displayed, the softkeys can be used to access
various analysis functions for complete device evaluation. These
functions include MARKER for numeric readout of measured value
at any point along a plotted curve, CURSOR for numeric readout of
value at any graphic point and for line positioning, STORE/RE-
CALL for overlay comparisons, AUTO SCALE for optimum graphic
scaling, and LINE FUNCTION for direct readout of line gradient
and X-Y axis intercept values.
Probe/Tester:
(1)EG 1034 (2)EG 2001 (3)EG 2010 (4)HP 4062 (5)HP 4145B (6)HP 4142B (7)HP 4155
(8)HP 4084B (9)HP 4085B
http://www.allwin21.com
peterchen@allwin21.com Phone: 001-408-988-5188 Peter Chen
The HP4062UX Semiconductor Process Control System is the high-end system of the HP4062 Semiconductor Parametric Test System family. The HP4062UX satisfies all of the requirements of the Integrated Circuit Manufacturers for both process monitoring and process development. Since the HP4062UX uses the same mea¬surement hardware as the HP4062C, it maintains the same highly accurate and reliable measurement capabilities as the HP4062C, such as high-speed measurements over a wide measurement range. For example, a typical connect-connect-force-measure sequence (resistance) measurement takes less than 17 ms, and measurements can range from 20 fA to lA and 4 µV to 200V.
In addition to the sophisticated hardware of the HP4062C, the HP4062UX provides powerful software capabilities with the HP BASIC/UX operating environment. HP BASIC/UX combines the most powerful instrument control language. HP BASIC, with all the elements of HP-UX, the Hewlett-Packard implementation of the AT&T System V UNIX* operating system. HP Interactive Mea¬surement and Analysis (IMA) Software makes measurements inter¬actively by providing a softpanel user interface.
HP4062UX Process Control System Key Features:
? High-speed and wide measurement range
? Standard networking
? Interactive Measurement and Analysis Software
? Multiuser and multitasking
? Multiwindowing
? Offline debugger
HP4062UX Process Control System Specification:
? Measurement functions:
I, V, I- V, C•G - V, C•G- t, Pulse I/V, Pulse I-V, Analog Search
? Switching matrix – Number of pins (to I DUT):
12 pins to 48 pins (48-pin matrix)
24 pins to 96 pins (96-pin matrix)
? Number of ports (to instrument): 9 ports (optionally 17) High-resolution source/monitor unit: 1 port
High-power source/ monitor unit: 1 port
Source/monitor units: 2 ports
Ground unit: 1 port optionally 10
Auxiliary: 4 ports
? Maximum voltage at each port: ±200V (SMU ports
±100V (aux. ports)
? Maximum current through port to pins: ±1.6A (GNDU port)
±1A (SMU port)
|
|
|
Location: |
Santa Clara, California, USA |
|
|
Contact
Person:
|
yanhongtan |
|
|
Phone: |
001-408-988-5188 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|